Aaron Klapheck's Website

Synopsis

The purpose of these programs is to collect data from three stations, one base station and two remote stations. The data from the remote stations will be transmitted to the base station using XBee wireless transceivers. The base station will then take all the data and transmit it to the Parallax Internet Netburner Kit (PINK), which essentially acts as a web server. A webpage on the PINK continuously displays the data on a webpage. So no matter where in the world I might be I can always figure out what is going on at my house. To see how this system work check out the video. This video does not have the two remote stations incorporated into it yet.

The project used the following hardware obtained from Parallax

• XBee Wireless transceivers - Three total, one per station
• XBee Adapter Board - Three total, one per station
• Sensirion Temperature/Humidity Sensor - One just for the base station
• Digital Thermometer DS1620 - One for both remote stations
• Photoresistor - VT935G-B - Three total, one per station
• Parallax Internet Netburner Kit (PINK) - Use one which connects to the base station
• Propeller Proto Board USB - One for both remote stations
• Propeller Mini Development Board* - Use this for the base station.

*I won this at the Propeller expo but I am not sure where it is sold. I had to use this part because the heat sinks on the Propeller Proto Boards boards would get too hot.

Building Instructions - Coming soon

All hardware components come with instructions and example code; make sure to get familiar with all of them before continuing.
The photos below should help with the hardware setup. Note: all of my code contains circuit diagrams for every piece of hardware.

Parallax Propeller Code: All Propeller code is explained in the file Read_Me.doc. - Coming soon!!

HTML Code: The PINK webpages shown in the video(s) were written in html by Aaron Klapheck. - Coming soon!!

Network setup is the same as that shown in the Internet Controlled Boe-Bot but is repeated below.

It is assumed that the reader has a basic understanding of computer networks. These are the steps I took to get this project on-line. First I set up my devices network settings by connecting it directly to my computer and using the IPSETUP program as described on page two of PINK Docs V2.1 . Next I used a patch cable to connect the PINK to my router. Now this is where things get a little trick. In order for a person to gain access to html pages on my PINK, via the internet, I had to perform the following two steps.
1. I had to make my router send webpage requests to my PINK. 2. I had to make my router accessible over the internet.

Step 1

To access my router I just had to put my router's IP address into my browser. I then checked to make sure that my PINK was showing up in my "connected computers" section of the router. If a web page request comes to your router, your router needs to know what to do with that request; this is done with port forwarding. The personal computer used to request information from a server is called a client. All web servers"listen" to see if a request is made by a client; the port that they listen to is port 80. There is nothing special about port 80, any port between 0 and 65536 can be used. A bunch of people just agreed that port 80 would be used for clients requesting websites from servers. As you might have guessed the port I forwarded to my PINK is port 80. The image below shows how I performed port forwarding for my D-Link router.



With port forwarding in place my device will now display webpages automatically when clients put my router's IP address in their web browser.

Step 2

At the end of step one, my router was technically accessible over the internet but there are two problems. First, no one wants to enter a series of numbers and dots into their browser. Second, I bought a standard internet plan and therefore my router's IP address is dynamic (it changes). I solved both of these problem with DynDNS . DynDNS gives you a domain name that follows your router no matter how many times it changes, and its free! The domain name I choose for my PINK is AaronKlapheck.dyndns-at-home.com . If my PINK is currently off then you will just see an error page.

Comments, complaints, suggestions? Please let us know.

You do not need facebook in order to post a comment (although it is preferred). Just write something and hit Post.

Problem with making a comment? This commenting ability may not be accessible to computers on slower networks.